INNOKIN - ADEPT ZLIDE - VAPE KIT

The Innokin Adept Zlide kit joins Innokin's IP67-rated Adept box mod with the 2ml Zlide tank, giving a complete, rugged MTL vape kit in the UK that is ready to fill. The Adept Zlide vape kit runs from a 3000mAh built-in battery, and the tank arrives with a 0.48ohm Plex3D mesh coil for a smooth, rich draw. Filled with a 20mg nic salt, it gives the sweet, disposable-style flavour many adult vapers are used to, from hardware built to last.

With a 2ml tank, the kit is TPD compliant for sale in the UK. Filling is done by sliding the top cap open, and airflow comes in from the base. Buyers comparing the Adept Zlide vs Endura T18X should note that the Adept carries a much larger battery and a sealed body, while the T18X is a slimmer pen. If customers ask what coils the Zlide tank uses, it takes Innokin's Zenith-series Z coils, so replacements are easy to source.

A shopper typing vape shop near me into a phone is often after something sturdy that survives daily life, and this kit answers that. As a vape distributor in the UK, we supply Innokin kits wholesale in six colours with no minimum order, so you can bulk buy vape kits in the shades your customers ask for. Stock ships from our vape wholesale Manchester warehouse, with same-day dispatch before 3pm.

Key Features & Benefits

• Sealed IP67 mod → a kit that copes with rain, dust and the odd drop
• Slide-open top fill → refilling takes seconds without unscrewing the tank
• Plex3D mesh coil fitted → rich, even flavour from a coil that is ready to go
• Uses Z-series coils → replacements are widely available and shared across Innokin tanks
• Tank auto-detection → the mod keeps power in a coil-friendly range

Technical Specifications

• Brand: Innokin
• Product Type: Box mod vape kit (Adept mod + Zlide tank)
• Battery: 3000mAh, built-in
• Output: Preset power levels; range not stated by the manufacturer
• Puffs: Not applicable (refillable)
• Ohms: 0.48ohm Plex3D Z coil (13–16W); mod supports 0.4–3.0ohm
• Nicotine Strength: Not applicable (use your own e-liquid)
• Charging Type: Micro USB, 5V/2A
• E-liquid Capacity: 2ml Zlide tank
• TPD Compliance: Yes, 2ml tank
• Country of Manufacture: Not stated by the manufacturer
• Fill Type: Top fill, slide-open cap
• Airflow: Bottom airflow
• Protection: IP67 (mod)
• Pack Size: 1 kit

Unique Selling Points

Zlide Slide-Fill Tank

The Zlide's top cap slides back to reveal the fill port, so the tank stays on the mod while it is topped up. Holding 2ml, it meets UK rules, and its bottom airflow feeds air straight past the coil for a mouth-to-lung draw that keeps flavour concentrated.

Plex3D Mesh Coil

The fitted 0.48ohm Plex3D coil uses a three-dimensional mesh heating element rather than a wound wire. Innokin rates it at 13–16W, which matches the Adept's low-power output, and the large surface area heats e-liquid evenly for a warmer, fuller taste than a standard MTL coil.

Weatherproof Adept Mod

The Adept mod is IP67 rated, sealed against dust and protected against temporary immersion. Inside sits a 3000mAh cell that charges over Micro USB, so the whole kit is self-contained, with no loose batteries, and it can be carried in a work bag or coat with confidence.

Why Choose the Innokin Adept Zlide Kit?

• Everything needed in one box, apart from e-liquid
• Coils cost less over time than buying new pods
• Built to survive outdoor work and travel
• Refills in seconds with the sliding cap
• Replacement Z coils fit several Innokin tanks

Use Cases

Outdoor worker: a gardener keeps the kit in a jacket pocket through wet weather, refilling at the van at lunchtime.

Upgrading from pods: a pod user who wants longer battery life and a choice of coils moves to the Adept Zlide for a sturdier everyday setup.

Shop starter-kit shelf: a retailer stocks the kit beside Z coils and nic salts so a customer can leave with a complete setup.

How to Use

1. Charge the Adept mod fully with the Micro USB cable.
2. Unscrew the mouthpiece and slide the top cap open.
3. Fill the tank with e-liquid, keeping it below the top.
4. Slide the cap closed and refit the mouthpiece.
5. Wait five minutes for the new coil to soak.
6. Screw the tank onto the mod and click fire three times to switch on.
7. Choose a power level with the select button and inhale while holding fire.

What's in the Box

• 1 x Innokin Adept mod
• 1 x Innokin Zlide tank (2ml)
• 1 x 0.48ohm Plex3D Z coil
• 1 x spare Innokin Z coil
• 1 x spare drip tip
• 1 x spare glass
• Spare O-rings
• 1 x Micro USB cable
• User manual

Colour Options

• Black — understated matt black.
• White — crisp white body.
• Purple — bold purple tone.
• Ocean — teal and pink marbled swirl.
• Forest Camo — woodland camouflage finish.

How It Compares

For Trade Buyers

The Innokin Adept Zlide kit is a complete box-mod starter kit that sells alongside Innokin Z coils, so each kit sold can bring the customer back for coil packs. There is no minimum order, and the six colours can be mixed freely to suit your display.

Margins improve at volume, with larger and repeat orders priced through our bulk order form. Kits are held at our Manchester warehouse and dispatched the same day on orders placed before 3pm, with free next-day delivery over £200, excluding BT postcodes. To plan an Innokin range or request a quote, contact our trade team.

Further Reading

• Innokin vape kits wholesale
• Innokin Adept Mod (mod only)
• Innokin Zlide Top Tank
• Disposable Vape Ban in the UK: What You Need to Know
• bulk order form for wholesale and trade orders

18+ only. This product contains no nicotine but is designed for use with nicotine e-liquid. It is for adults aged 18 and over only and is not for sale to anyone under 18.