Smok Nfix Pro Pod Kit

The SMOK Nfix Pro pod kit is a slim, draw-activated device made for mouth-to-lung vaping. A 700mAh built-in battery powers an adjustable 5-25W output, and a 0.69-inch OLED screen shows wattage, resistance and battery level. Two LP1 meshed coils come in the box, 0.9 ohm fitted and 1.2 ohm spare, making it an MTL pod kit UK vapers can use straight away.

The refillable pod holds 2ml and fills from the side, so the kit is TPD compliant. Anyone asking what coils fit the SMOK Nfix Pro needs SMOK's LP1 series, and spare Nfix Pro pods come in packs of three. Filled with a 20mg nic salt and run on the 1.2 ohm coil at low power, the tight draw gives a disposable-style flavour from a device that is refilled rather than replaced. Comparing the SMOK Nfix Pro vs Nord C? The Nord C carries a larger 1800mAh battery and a fire button, while the Nfix Pro is the slimmer, pen-like choice that fires when you inhale.

Customers searching SMOK vape shop near me are often after a discreet refillable kit, and the Nfix Pro suits that brief. We supply SMOK wholesale UK stock with no minimum order, so shops buying wholesale pod kits UK-wide can start small and bulk buy SMOK vape kits as sales grow. Everything ships from our vape wholesale Manchester warehouse.

Key Features & Benefits

• Draw-activated firing → no buttons to press mid-puff, so it feels natural for first-time pod users
• Adjustable output → the power can be tuned to the coil for a warmer or cooler draw
• Two LP1 meshed coils included → a choice of draw tightness without buying extra coils
• Small OLED screen → battery level and settings are visible at a glance
• Adjustable airflow → the draw can be tightened for a cigarette-like pull or opened slightly

Technical Specifications

• Brand: SMOK
• Product Type: Refillable MTL pod kit
• Battery: 700mAh, built in
• Puffs: Not applicable (refillable)
• Ohms: LP1 Meshed 0.9 ohm (pre-installed) and LP1 Meshed 1.2 ohm (spare)
• Nicotine Strength: Not applicable (supplied empty); use UK-legal e-liquid up to 20mg/ml
• Charging Type: USB-C
• E-liquid Capacity: 2ml refillable pod
• TPD Compliance: Yes, 2ml pod
• Country of Manufacture: Not stated by the manufacturer
• Wattage: 5-25W
• Resistance Range: 0.6-3.0 ohm
• Fill Type: Side fill
• Compatible Coils: SMOK LP1 series
• Pack Size: 1 kit, choice of 9 colours

Unique Selling Points

LP1 Meshed Coils

The Nfix Pro uses SMOK's LP1 coils, which push into the pod and can be changed on their own. Meshed coils heat across a wide flat surface, so e-liquid vaporises evenly and the taste stays clean. Because only the coil is swapped when flavour fades, the pod lasts much longer than one with a built-in coil.

5-25W Fine Control

Many slim MTL kits run at a fixed power. The Nfix Pro lets the user set anything from 5W to 25W with the power button, which means the 1.2 ohm coil can run gently for a tight nic salt draw, while the 0.9 ohm coil can be turned up a little for more warmth and vapour.

Draw-to-Fire Simplicity

There is no fire button to hold. The device senses an inhale and fires automatically, much like a disposable. Combined with the adjustable airflow, this makes it easy for a newcomer to learn, while the wattage control and screen give experienced users the detail they want.

Why Choose the SMOK Nfix Pro Pod Kit?

• A refillable kit that feels as simple to use as a disposable
• Coils change separately, so running costs stay low
• Two coil resistances to find the right draw
• Slim enough to carry in any pocket
• A choice of nine colours that sells well on a counter display

Use Cases

Commuter: a daily train traveller keeps the slim Nfix Pro in a jacket pocket and refills it from a 10ml nic salt before leaving home.

Shift worker: a nurse on long shifts uses the 1.2 ohm coil at low power so a 2ml fill and one charge go further between breaks.

Counter display: a newsagent places a few colours by the till next to LP1 coils and nic salts for easy add-on sales.

How to Use

1. Charge the device with a USB-C cable.
2. Lift the pod off the device.
3. Open the side fill port.
4. Fill the pod with e-liquid.
5. Close the fill port.
6. Leave the pod for ten minutes so the coil can soak.
7. Put the pod back on the device.
8. Press the power button five times to switch on.
9. Set the wattage within the range printed on the coil.
10. Inhale gently to vape.

What's in the Box

• 1 x SMOK Nfix Pro device (700mAh)
• 1 x Nfix Pro pod (2ml) with LP1 Meshed 0.9 ohm coil pre-installed
• 1 x LP1 Meshed 1.2 ohm coil
• 1 x USB-C cable
• 1 x User manual

Colour Options

• Black — a plain black finish that suits any setting.
• Grey — a muted grey body with an understated look.
• Blue Green — a two-tone blend of blue and green.
• Cyan Pink — bright cyan paired with soft pink.
• Silver Blue — silver with a cool blue accent.

How It Compares

For Trade Buyers

The Nfix Pro gives you a slim MTL kit to recommend to customers moving on from disposables, and every unit sold brings return visits for SMOK LP1 Coils (Pack of 5) and SMOK Nfix Pro Empty Pods (Pack of 3). There is no minimum order quantity, so you can test a handful of colours before committing to a larger range.

Margins improve at volume, and larger or repeat orders can be priced through our bulk order form. Stock ships from our Manchester warehouse, with same-day dispatch on orders placed before 3pm and free next-day delivery on orders over £200, excluding BT postcodes. For a wholesale quote, contact our trade team.

Further Reading

• SMOK pod kits wholesale
• SMOK LP1 Coils (Pack of 5) (coils for this kit)
• SMOK Nfix Pro Empty Pods (Pack of 3)
• Nic salt e-liquids
• bulk order form for trade orders

18+ only. This product contains no nicotine but is made for use with nicotine e-liquid. It is for adults aged 18 and over only and is not for sale to anyone under 18.