Geekvape P Series Replacement Coils Pack of 5

Geekvape P Series coils are push-in sub-ohm heads for Geekvape's higher-power pod mods, including the Aegis Boost Pro, Aegis Boost Pro 2 (B100), Obelisk 60 and E100. Each P Series replacement coils pack of 5 holds one resistance, chosen from 0.15Ω, 0.2Ω, 0.4Ω or 0.5Ω on this page. For shops stocking sub-ohm mesh coils in the UK, they are the consumable that keeps these devices in daily use.

These heads are built for direct-lung vaping with 50/50 or high-VG e-liquid, so they deliver dense vapour rather than the disposable-style flavour of a tight nic salt pod. Coils are not capacity-regulated, but the pods they sit in must be TPD compliant 2ml versions in the UK. For buyers asking what devices use Geekvape P Series coils, Geekvape also lists the E100i. In the P Series 0.2 vs 0.4 ohm choice, the 0.2Ω runs at 60W to 70W and the 0.4Ω at a gentler 50W to 60W.

Coils wear out regularly, so customers searching vape coils near me come back often. We supply Geekvape coils wholesale with no minimum order, letting shops bulk buy P Series coils in every resistance. As a coil supplier in the UK, we ship from our vape wholesale Manchester warehouse the same day on orders placed before 3pm.

Key Features & Benefits

• Four resistances → users can match the coil to their wattage and preferred cloud size
• Push-in fit → changing a coil takes seconds with no tools
• Mesh heating element → e-liquid heats evenly for smooth, dense vapour
• Fits several Geekvape devices → one coil range supports Boost Pro, Boost Pro 2, Obelisk 60 and E100 owners
• Five coils per pack → spares last weeks between orders

Technical Specifications

• Brand: Geekvape
• Product Type: Replacement sub-ohm coils (P Series)
• Battery: Not applicable
• Puffs: Not applicable
• Ohms: Choose 0.15Ω XM (70W to 85W), 0.2Ω (60W to 70W), 0.4Ω (50W to 60W) or 0.5Ω (40W to 50W)
• Nicotine Strength: Not applicable, no e-liquid included
• Charging Type: Not applicable
• E-liquid Capacity: Not applicable (capacity depends on the pod used)
• TPD Compliance: Not applicable to coils; use in UK TPD 2ml pods
• Compatibility: Geekvape Aegis Boost Pro, Aegis Boost Pro 2 (B100), Obelisk 60, E100 (Aegis Eteno) and E100i; not the standard Aegis Boost, Boost Plus or Hero
• Country of Manufacture: Not stated by the manufacturer
• Pack Size: 5 coils, one resistance per pack

Unique Selling Points

Mesh for Even Heating

The 0.2Ω and 0.4Ω P Series heads use a mesh heating element, a flat perforated strip that contacts more of the cotton than a round wire. Heat spreads evenly across the wick, so e-liquid vaporises smoothly at high wattage, with fewer hot spots and less chance of a harsh puff as the coil ages.

Four Power Bands

Geekvape rates each head for its own window: 40W to 50W for the 0.5Ω, 50W to 60W for the 0.4Ω, 60W to 70W for the 0.2Ω and 70W to 85W for the 0.15Ω XM. That spread lets a user step up or down in vapour and warmth on the same device, simply by changing the coil.

Wide Device Support

Geekvape lists P Series coils for the Aegis Boost Pro, Aegis Boost Pro 2, Obelisk 60, E100 and E100i. One coil family therefore covers several popular Geekvape pod mods, which simplifies stock for retailers and means users keep the same coils if they move between these devices.

Why Choose the Geekvape P Series Coils (Pack of 5)?

• Dense, smooth vapour for direct-lung users
• Four resistances to fine-tune power and warmth
• Five coils per pack, so spares are always to hand
• Cheaper to replace a coil than a pod or device
• A regular repeat purchase that brings customers back

Use Cases

Boost Pro owner: a vaper on the Aegis Boost Pro keeps a pack of 0.4Ω coils in a drawer and swaps one in every week or so.

High-power vaper: someone using an E100 at home runs the 0.15Ω XM head with a high-VG shortfill for big clouds.

Coil wall: a vape shop stocks all four P Series resistances beside its Geekvape pod mods so kit buyers can always find a refill.

How to Use

1. Switch the device off.
2. Remove the pod from the device.
3. Empty any e-liquid left in the pod.
4. Pull the old coil out.
5. Push a new P Series coil firmly into place.
6. Refill the pod with e-liquid.
7. Wait about five minutes for the coil to soak.
8. Set the wattage at the low end of the coil's range.

What's in the Box

• 5 x Geekvape P Series coils in your chosen resistance

Resistance Options

• 0.15ohm — XM head rated at 70W to 85W for large, warm clouds.
• 0.2ohm — mesh head rated at 60W to 70W for dense direct-lung vapour.
• 0.4ohm — mesh head rated at 50W to 60W for a balanced, slightly cooler vape.
• 0.5ohm — rated at 40W to 50W for lower-power direct-lung use.

How It Compares

For Trade Buyers

Geekvape P Series coils are a dependable repeat line, because every Aegis Boost Pro, Boost Pro 2, Obelisk 60 and E100 in your customers' hands needs fresh coils regularly. There is no minimum order quantity, so you can carry all four resistances in small numbers and build up the 0.2Ω and 0.4Ω packs that tend to move faster.

Margins improve at volume, and larger or repeat coil orders can be priced through our bulk order form. Stock leaves our Manchester warehouse the same day on orders placed before 3pm, with free next-day delivery on orders over £200, excluding BT postcodes. For a quote, contact our trade team.

Further Reading

• Geekvape coils wholesale
• Geekvape E100 (Aegis Eteno) Vape Kit
• Geekvape Obelisk 60 Cartridge Pods
• bulk order form for trade and wholesale orders

18+ only. This product is for adults aged 18 and over only and is not for sale to anyone under 18.