Oxva Xlim EZ Cartridges Pods - Pack of 3

The OXVA Xlim EZ pods are top-fill replacement cartridges sold in packs of three, one resistance per pack. Each Xlim EZ cartridge clips onto the device magnetically and has a mesh coil built in, so a worn pod is swapped in seconds. They are a straightforward choice for anyone buying refillable Xlim pods in the UK, and with a 20mg nic salt they give rich, disposable-style flavour from a reusable kit.

The UK version holds 2ml, which makes every pod TPD compliant. Customers asking which Xlim pods fit my device can use them in the Xlim Pro, Xlim Pro 2, Xlim Pro 3, Xlim SE 2, Xlim SQ Pro and Xlim Go, but not the Xlim C. On Xlim EZ 0.6 vs 0.8 ohm, the 0.6 ohm suits a looser restricted lung draw at 20-25W, while the 0.8 ohm gives a tighter mouth-to-lung pull at 12-16W.

Shoppers searching vape shop near me for Xlim refills want a pack on the shelf that fits first time, and these cover most of the range. We supply OXVA wholesale UK stock with no minimum order, so retailers can bulk buy Xlim pods across all four resistances. As a source of wholesale vape pods UK shops rely on, we dispatch from our vape wholesale Manchester warehouse the same day for orders placed before 3pm.

Key Features & Benefits

• Top-fill port under the mouthpiece → refilling is quick and the pod can stay in the device while you do it
• Built-in mesh coil → there is no separate coil to fit, and flavour stays even through the life of the pod
• Four resistance options → one cartridge line covers tight mouth-to-lung and looser restricted lung draws
• Magnetic connection → the pod clicks into place and comes out cleanly when it is time to change it
• Wide Xlim compatibility → one pack fits most Xlim kits customers already own, so fewer separate pod lines are needed

Technical Specifications

• Brand: OXVA
• Product Type: Refillable top-fill replacement cartridges for OXVA Xlim devices
• Battery: Not applicable (powered by the Xlim device)
• Puffs: Not applicable (depends on e-liquid and draw style)
• Ohms: 0.4 ohm (26-30W), 0.6 ohm (20-25W), 0.8 ohm (12-16W) or 1.2 ohm (10-12W) mesh coil
• Nicotine Strength: Not applicable (supplied empty)
• Charging Type: Not applicable
• E-liquid Capacity: 2ml per pod (UK TPD version)
• TPD Compliance: Yes, 2ml maximum capacity
• Country of Manufacture: Not stated by the manufacturer
• Pack Size: Pack of 3 pods, one resistance per pack

Unique Selling Points

Top-Fill Refilling

The filling port sits under the mouthpiece rather than on the side or base of the pod. You lift the mouthpiece, fill the 2ml chamber and close it again, with no need to pull the pod out of the device. That reduces spills during refilling and makes it practical to top up on the go.

Integrated Mesh Coil

Each cartridge has its own mesh coil sealed inside. A mesh strip heats across a wider surface than a round wire, which helps the e-liquid vaporise evenly and keeps the taste consistent from a fresh fill to the last few puffs. When the flavour finally fades, the whole cartridge is replaced, so there is no coil fitting at all.

Four Draw Styles

OXVA makes the EZ cartridge in four resistances. The 0.4 and 0.6 ohm pods are built for a looser restricted lung draw at higher power, while the 0.8 and 1.2 ohm pods give the tighter mouth-to-lung draw many nic salt users prefer. Stocking all four lets a shop match a pod to almost any Xlim customer.

Why Choose the OXVA Xlim EZ Cartridges (Pack of 3)?

• Fewer pod lines to stock, because one cartridge fits most Xlim kits
• Customers keep their device and only rebuy pods
• Mess-free top filling that suits beginners
• A clear resistance choice for both mouth-to-lung and lung-style vapers
• Reusable hardware means less waste than throwaway devices

Use Cases

Xlim Go owner: someone who started on an Xlim Go keeps a pack of 0.8 ohm cartridges in a drawer and swaps in a fresh pod whenever the flavour starts to dull.

Upgrader: a vaper moving from an older Xlim to the Xlim Pro 3 carries on with the same EZ cartridges, so there is nothing new to learn.

Pod wall: a vape shop hangs all four resistances together beside its OXVA kits, so staff can hand over the right pod without checking a chart.

How to Use

1. Choose the resistance that suits your draw and device.
2. Lift off the mouthpiece to open the top-fill port.
3. Fill the pod with e-liquid, keeping below the maximum line.
4. Close the mouthpiece firmly.
5. Wait around five minutes so the coil can soak.
6. Click the pod into your Xlim device.
7. Take a few gentle puffs before vaping as normal.

What's in the Box

• 3 x OXVA Xlim EZ cartridges (one resistance)

Resistance Options

• 0.4 ohm — a looser restricted lung draw for bigger clouds at 26-30W.
• 0.6 ohm — a balanced restricted lung draw at 20-25W.
• 0.8 ohm — a smooth mouth-to-lung draw at 12-16W, well suited to nic salts.
• 1.2 ohm — a tight, cigarette-style mouth-to-lung draw at 10-12W.

How It Compares

For Trade Buyers

Xlim EZ cartridges fit most Xlim kits already in your customers' hands, which makes them one of the easier pod lines to keep moving. There is no minimum order quantity, so you can take a few packs of each resistance and reorder the ones that sell through quickest.

Margins improve at volume, and larger or repeat orders can be quoted through our bulk order form. Stock is held at our Manchester warehouse and orders placed before 3pm are dispatched the same day, with free next-day delivery on orders over £200, excluding BT postcodes. To plan an OXVA pod range or ask about availability, contact our trade team.

Further Reading

• OXVA wholesale range
• OXVA Xlim Pro 3 Pod Vape Kit (takes EZ cartridges)
• Complete Guide to the OXVA Xlim Pro 3
• Nic salt e-liquids for pod kits
• bulk order form for trade and bulk orders

18+ only. This product is for adults aged 18 and over only and is not for sale to anyone under 18.