Geekvape Aegis Boost Pro Pods 2ml

The Geekvape Aegis Boost Pro pod is the refillable cartridge for the Aegis Boost Pro (B100) kit, sold here as a single unit so a customer can replace one tired or cracked pod without buying a full pack. This Aegis Boost Pro replacement pod holds 2ml in its UK form and is a regular request among Geekvape replacement pods in the UK from higher-power pod mod users.

The UK version is TPD compliant, with a silicone stopper limiting the fill to 2ml. Customers asking which coils fit the Aegis Boost Pro pod need Geekvape P series coils, such as the 0.2ohm or 0.4ohm mesh heads, which push in from the base. For anyone wondering how to fill an Aegis Boost Pro pod, the port sits on top, away from the mouthpiece, so it can be topped up without removing the drip tip. Paired with a nic salt or shortfill, a fresh pod gives clean, disposable-style flavour with no taste carried over from an old cartridge.

Shoppers searching for a Geekvape stockist near me usually need this pod the day theirs fails, so it is worth keeping a few singles behind the counter. As a trade vape supplier in the UK, we offer Geekvape wholesale UK supply and wholesale vape pods with no minimum order, dispatched from our vape wholesale Manchester warehouse when ordered before 3pm.

Key Features & Benefits

• Single-pod listing → customers replace exactly what broke, without paying for spares they do not need
• P series coil fitting → one pod works with both the tighter and the more open P series mesh heads
• Top fill away from the mouthpiece → refills happen with the pod still in the device and the drip tip in place
• Silicone-stoppered fill port → the cap seals firmly, so the pod is less likely to seep in a pocket or bag
• UK 2ml format → the pod can be sold legally on any UK shelf

Technical Specifications

• Brand: Geekvape
• Product Type: Refillable replacement pod
• Battery: Not applicable
• Puffs: Not applicable
• Ohms: Takes Geekvape P series coils (0.2ohm or 0.4ohm mesh); coils not stated as included
• Nicotine Strength: Not applicable (supplied empty)
• Charging Type: Not applicable
• E-liquid Capacity: 2ml (UK TPD version)
• TPD Compliance: Yes, UK version restricted to 2ml
• Country of Manufacture: Not stated by the manufacturer
• Pack Size: 1 pod
• Compatibility: Geekvape Aegis Boost Pro (B100) kit
• Fill Type: Top fill with silicone stopper

Unique Selling Points

Built for P Coils

Geekvape designed the Boost Pro around its P series coils, which are not shared with the standard Boost or Hero ranges. The pod has a matching base, so the coil pushes in and seals without threads. A 0.2ohm head suits open direct-lung vaping at higher power, while a 0.4ohm head gives a slightly tighter restricted draw.

Refill Without Removal

The fill port sits on the top of the pod, separate from the mouthpiece, and closes with a silicone stopper. Users lift the stopper, add e-liquid and close it again with the pod still seated in the device, which cuts down on drips and makes topping up quicker on the move.

Keeps the Kit in Service

Pods wear over time: the plastic can crack if dropped and the seals loosen with repeated coil changes. A spare cartridge keeps the Boost Pro in use rather than sitting in a drawer, which protects the value of the kit the customer already owns.

Why Choose the Geekvape Aegis Boost Pro Pod 2ml?

• Keeps an existing Boost Pro kit running for a small outlay
• One pod suits both P series coil resistances
• Refilling is quick and tidy thanks to the top port
• UK-legal 2ml format, ready for the shelf
• A steady add-on sale wherever Boost Pro kits are sold

Use Cases

Dropped device: a Boost Pro owner cracks a pod at the weekend and replaces it the same day rather than buying a whole new kit.

Flavour swapper: a vaper keeps one pod for fruit liquids and a second for tobacco blends, so flavours never mix.

Counter spare: a vape shop holds a handful of single pods for walk-in customers whose cartridge has failed.

How to Use

1. Remove the old pod from the Aegis Boost Pro.
2. Push a P series coil into the base of the new pod.
3. Lift the silicone stopper on top of the pod.
4. Fill with e-liquid up to the 2ml limit.
5. Close the stopper firmly.
6. Fit the pod into the device.
7. Wait five minutes for the coil to soak.
8. Set the wattage to the range printed on the coil and start vaping.

What's in the Box

• 1 x Geekvape Aegis Boost Pro replacement pod (2ml)

How It Compares

For Trade Buyers

Single Aegis Boost Pro pods suit shops that serve existing Boost Pro owners: one pod per sale, often bought alongside Geekvape P Series Replacement Coils. There is no minimum order, so you can hold a small number of singles and add the pack-of-two listing for customers who prefer spares.

Margins improve at volume, and repeat or larger orders can be priced through our bulk order form. Stock ships from Manchester, with same-day dispatch on orders placed before 3pm and free next-day delivery on orders over £200, excluding BT postcodes. For a quote or advice on Geekvape spares, contact our trade team.

Further Reading

• Geekvape replacement pods wholesale
• Geekvape P Series Replacement Coils (coils for this pod)
• Geekvape Aegis Boost Pro Pods, Pack of 2
• How to Buy Vapes Wholesale in Bulk
• bulk order form for trade orders

18+ only. This product does not contain nicotine, but it is designed for use with nicotine e-liquids and is not for sale to anyone under 18.